11
KR 702- 2 / Serial no. 1910404/2008
1.3 Safety instructions for operation the drill rig
1. Operation and maintenance of KLEMM drill rig
Independent and unassisted operation (operator) and maintenance
(fitter) is to be entrusted only to persons who:
1.1 Are at least 18 years of age (Check for local stipulations)
1.2 Are physically and mentally suited
1.3 Have been instructed in operating and maintaining
the crawler drill rig and have proven their ability to the
contractor / user
1.4 Can be expected to perform responsibly
And are designated for the job by the contractor/user.
2. Danger zone
Be sure that no one is within the drill mast’s danger zone.
The danger zone is the area around the drill rig within which persons may be
endangered by the rig’s slewing range or its components working movements.
The operator must work the machine only if no one is within the danger zone.
In case of danger the operator must give warning signals. Warning signals are
generally given with horns.
Pre-determined hand warning signals must be used if on- site noise is liable
to drown audible signals.
If persons do not leave the danger zone despite having been warned the ope-
rator must stop working immediately.
3. Safety distance
A safety clearance of min. 0,5 metres must be kept from buildings, scaffolding
and other equipment to prevent the danger of being squashed.
Keep in mind the drill rig’s slewing facilities.
If the safety clearance cannot be complied with the area must be cordoned off.
To Next Page
Loading...
Need help?
General