10
KR 702- 2 / Serial no. 1910404/2008
1.2 General safety instructions
F Directive of application
The KLEMM drill rig must be used only as directed in DIN EN ISO 12100- 1
(safety of machinery), and as described in the operators manual for drilling
operations. Another using of the drill rig as directed (e.g. for lifting operations
as a crane or ground moving operatios) is striktly forbidden.
F Make sure all persons are clear of the machine before moving or starting any
drilling operation.
F All personnel involved in operating and maintaining this equipment
must first read and thouroughly understand the operating instructions.
F Operating instructions
Operating instructions for the KLEMM Bohrtechnik drill rig must be
complied with for operation, maintenance, service, repairs and transport. The
contractor is obliged to amend safety regulations to meet local requirements.
Operating instructions and amendments must be kept securely on the working
site.
F Personal Safety Equipment
Wear Personal Safety Equipment - Working gloves
- Safety boots
- Safety hat
- Hearing protection
- Safety glasses
- Nose mask (only if dust)
Wear tight clothes (protection clothes according to DIN).
Keep hands, arms, legs and clothing away from all moving parts.
Do not touch heated up parts with your bare hands. Wear protection gloves.
F Vibrations
The weighted value of the vibrations of the body (feet, seat face) of 0,5m/s
2
,
which can shake the operator during the drilling work, is not exceeded. The
value of the hand/the arm vibrations, which shake the operator during the dril-
ling work, is under 2,5m/s
2
.
To Next Page
Loading...
Need help?
General