7
KR 702- 2 / Serial no. 1910404/2008
1 Safety instructions
All personnel involved in operating and/or maintaining this equipment must first
read and thoroughly understand the operating instructions before attempting to
operate or perform maintenance on the drill rig. Non-authorised or untrained per-
sonnel must not under any circumstances attempt to operate or repair the machine.
Safety first must always be the primary consideration of all personnel while opera-
ting or maintaining the drill rig under normal and especially in unusual conditions.
Since these safety precautions cannot cover every possible situation, everyone is
expected to exercise good judgement, foresight and common sense while operating
or working with, on, or near the drill rig.
The signs CAUTION and PLEASE NOTE
are to be defined as follows :
CAUTION
This word is used to point out that inadequate or
non -compliance with operating manuals, working instructions, operational
sequences etc. will substantially damage property or cause severe
personal injury which could be fatal.
PLEASE NOTE
PLEASE NOTE is used to make people aware of installations
and gives hints for operation and maintenance which are important but not
hazard related. It generally indicates an operational aid.
To Next Page
Loading...
Need help?
General