Please note that where there is no
matting or cable installed the floor will
not be heated!
If the mat is too long the cable can be
cut loose from the fibre netting and
installed in loose strips. Loose cables
must be looped at least 4 cm from
each other. They may not touch or
cross each other.
The sensor must be installed in the
middle of a cable loop for optimal
temperature registration. Ensure that
the sensor is installed well clear (min.
50 cm) of (hidden) radiator and water
pipes, drains and electrical wiring.
The Mat or Cable may never be
installed under fixed objects like wall
units, kitchen units, baths, or showers
and must be able to give off its
warmth unimpeded.
To Next Page
Loading...
Need help?
General