Need help?Do you have a question about the Klima 500 and is the answer not in the manual?
Introduction to the Klima Cable and contact information for technical support and website.
Verify all components are present in the box before commencing installation.
Details product specifications like wattage, ampère, ohm, and cable dimensions.
Critical points on cable placement, insulation, wet areas, and electrical safety.
Details the guarantee period for the heating system and thermostat.
Lists essential tools and materials needed for the installation process.
Steps for checking cable, electrical supply, testing resistance, and floor preparation.
Guidance on determining the correct cable size and spacing for room heating needs.
Instructions for performing and recording resistance tests for warranty.
Step-by-step guide on routing and securing the heating cable on the floor.
Methods for applying screed directly to concrete or insulation.
Specific instructions for installing on insulation and dovetailed subfloors.
Explains the correct procedure for initial system activation after drying.
Instructions for wiring the thermostat, including the wiring diagram.
Diagram showing cable placement and notes on coverage, spacing, and avoiding obstacles.
Guidelines for correctly positioning and protecting the floor temperature sensor.
Emphasizes critical safety and installation points that must be followed.
Details on cable limitations, shortening, extending, and floor finishing.
How to fix the cable onto weld mesh, considering floor finish and corrosion.
Steps for setting timer functions and initial comfort temperatures for the thermostat.
General| Power | 500W |
|---|---|
| Voltage | 230V |
| Frequency | 50Hz |
| Waterproof Rating | IP67 |
| Type | Electric |
To Next Page