Klipsch Icon SB 1 - Remote Control Programming Issues; Care and Cleaning

TV/Cable Box/Satellite Box Remote Will Not Program
• Carefully follow all programming instructions
• Program your original TV remote to the soundbar , then try using your universal
remote without programming it
• You may need to repeat the programming of a function in some cases
• There may be some cases where the soundbar will not be able to learn all remote
control codes
For Questions , contact Klipsch Customer Service: In the United States : 1-800-KL/PSCH
CARE AND CLEANING
Occasional dusting or wiping of the cabinets with a soft cloth is all that is required . Never
use water, abrasive or solvent type cleaners or detergents. Never spray polishes or cleaners
on the drive units (woofer, midrange or tweeter) or on any controls or connection po i nts. A
vacuum clean er with a soft brush attachment may be used to clean the grill fabric . Take
grills off before us ing a vacuum and do not vacuum on the drivers.
Klipsch is a registered trademark of K/ipsch Group In c.