KDA AMPLIFIERS – DSP MENU USER GUIDE
SECTION 2 : DSP MENU PAGES
SPEAKER PRESET
Select Klipsch products to
optimize acoustic performance
through custom designed DSP settings. Will insert
custom EQ and limiter settings in the
corresponding output channel on the EQ page.
Shows “Custom” when user EQ/limiter settings
are used.
LIMITER
Set maximum output wattage
to ensure correct speaker relability.
OUTPUT MODE
Select stereo mode for independent channels, or
bridged mode to combine channels for more
output power. When using 70V or 100V, bridged
channels are required.
OUTPUT IMEDANCE
Select output impedance from
channel to match speaker
(4 ohm / 6 ohm / 8 ohm / 16 ohm / 70V / 100V).
11
To Next Page
Loading...
