Need help?Do you have a question about the Klipsch POWERGATE and is the answer not in the manual?
General| Amplifier class | D |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 2.0 channels |
| Peak power per channel | 100 W |
| Signal-to-Noise Ratio (SNR) | 90 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (6 Ohm) | 75 W |
| RMS power output per channel (2 Ohm) | 50 W |
| Pre out port | Yes |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 2 |
| Digital audio optical in | 1 |
| AC input voltage | 110-240 V |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Cables included | Audio (3.5mm), TOSLINK Digital Optical, USB |
| Connectivity technology | Wired & Wireless |
Weight and Dimensions| Depth | 152.4 mm |
|---|---|
| Width | 254 mm |
| Height | 63.5 mm |
| Weight | 1360 g |
Details the DC power cord included with the unit.
Specifies the 3.5mm auxiliary cable for audio input.
Information on the digital optical cable for audio connections.
Details the USB cable provided for data transfer or power.
Describes the included remote control for operating the device.
Controls the power state of the amplifier.
Displays and allows selection of the audio input source.
Visualizes volume level and allows adjustment/muting.
Indicators for speaker and subwoofer status.
Port for connecting headphones for private listening.
Controls for power, muting, and adjusting main/subwoofer volume remotely.
Buttons to select audio sources like Auxiliary, Phono, USB, Digital, Bluetooth.
Buttons for track navigation and playback control for compatible sources.
Ports for Optical, Analog RCA (input/output), and Auxiliary audio connections.
Terminals for connecting speakers and subwoofer output.
Ports for Wi-Fi setup, USB audio input, service, and optional Ethernet.
Power input connector and ground screw terminal for stable operation.
Lists the necessary hardware and software for DTS Play-Fi functionality.
Instructions for downloading the required mobile application.
Step-by-step guide for establishing a Wi-Fi connection.
Steps to take if the Wi-Fi indicator LED is not pulsing.
Alternative connection method using a WPS-enabled router.
Guide on adding more Klipsch wireless multi-room products via the app.
Instructions for setting up and using the Spotify Connect feature.
Legal information regarding Spotify software licenses.
Diagram illustrating the connection of a powered subwoofer via RCA.
Illustrates connecting passive speakers using analog binder posts.
How to connect audio sources using the 3.5mm auxiliary port.
Shows how to connect various analog audio sources via RCA cables.
Step-by-step guide for pairing Bluetooth-enabled devices.
Illustrates the proper connections for a turntable, including ground.
How to connect audio devices using an optical cable and set output to PCM.
Instructions for USB audio connection and required driver installation.
Details on using the volume knob and mute function.
Explanation of the front panel volume indicator LEDs' behavior.
How to control and monitor subwoofer volume levels using the indicator.
Instructions on how to reset the device to factory default settings.
Details the power consumption of the unit in network standby mode.
To Next Page
