Need help?Do you have a question about the Klipsch KDA-1000 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Impedance | 20 kΩ |
| Inputs | XLR, RCA |
| DSP | Yes |
| THD | < 0.1% |
| Cooling | Fan-cooled |
| Power Output | 1000W |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Signal-to-Noise Ratio | >100dB |
| Outputs | Binding Posts |
| Damping Factor | >200 |
Details how to access the DSP menu using a network router, which is the recommended method.
Explains how to connect directly to the KDA amplifier via Ethernet for menu access.
Guides on accessing the DSP menu using a smartphone or tablet via Wi-Fi.
Describes the main dashboard or home screen of the DSP menu interface.
Details the settings and configuration options available on the General page.
Explains how to select and configure audio inputs for output channels.
Covers equalization settings, including crossover and parametric EQ adjustments.
Details output configuration, speaker presets, limiter, and impedance settings.
Lists supplementary resources like hardware manuals, web pages, and spec sheets.
To Next Page
