SECTION 1: ACCESSING THE DSP MENU
KDA AMPLIFIERS – DSP MENU USER GUIDE
VIA SMARTPHONE OR TABLET
1. Connect an ethernet cable from the ethernet port on the KDA amplifier to an ethernet port on the wireless router in DHCP mode. This is usually the default
router setting, but consult your router’s user manual to confirm this setting.
2. Connect your smartphone or tablet to the same router via Wi-Fi.
3. Using your router’s set up software or an IP scanner (Fing IP Scanner app is recommended for iOS or Android and Advanced IP Scanner is recommended for
Windows devices) to identify the IP address of the KDA amplifier.
4. Open a web browser on your device. Safari or Chrome are recommended. Enter the IP address of the KDA amplifier into the browser menu. Hit Ent er.
5. The Klipsch KDA DSP Menu will open in the browser window.
To Next Page
Loading...
