Klipsch Subwoofer Amplifier Service Manual KSAMM-002a
Specifications
Model: SW12-I
Input Sensitivity for max Rated Output: Line input 60mVrms @ 30Hz.
Speaker input 700mVrms @ 30Hz.
Maximum Rated Output: 150 Watts into 8 ohms.
Max. Hum: 3.5mV @ 60Hz.
Max. Distortion: 4% At Full Rated Output.
Freq Response: 27 to 120Hz +0/-3dB w/12dB per Octave Rolloff.
Bass Boost: +6dB Boost @ 30Hz.
Low Pass Crossover: Variable from 40 - 120 Hz.
24 dB/Octave slope above 120 Hz.
High Pass Crossover: Line outputs fixed at 80 Hz, 6dB/Octave slope.
Speaker outputs fixed at 120 Hz, 6dB/Octave slope.
Model: SW15-I
Input Sensitivity for Max Rated Output: Line input 33mVrms @ 30Hz.
Speaker input 900mVrms @ 30Hz.
Maximum Rated Output: 200 Watts into 4 ohms.
Max. Hum: 3.5mV @ 60Hz.
Max. Distortion: 4% At Full Output.
Freq Response: 27 to 120Hz +0/-3dB w/12dB per Octave Rolloff.
Bass Boost: +6dB Boost @ 30Hz.
Low Pass Crossover: Variable from 40 - 120 Hz.
24 dB/Octave slope above 120 Hz.
High Pass Crossover: Line outputs fixed at 80 Hz, 6dB/Octave slope.
Speaker outputs fixed at 120 Hz, 6dB/Octave slope.
Page 2
To Next Page
Loading...
