504G3 SERIES TRACTOR OPERATION MANUAL
18
2.2.2ComponentIdentificationPlates
Engine Identification Plate Location
The engine identification plate is attached
to the left hand side of the engine block.
The information contained on this plate
includes the engine model and serial
number.
ROPS Certification Plate
Your machine is built to the ROPS
standard and has an identification
identification label is shown below.
Label fitted to the ROPS or cab.
Tractor Drawbar Or Clevis type Certification Plate
The Tractor drawbar or Clevis type on your m
achine is built to a standard and has an
identification label fitted to the top of the trailer hitch. A typical identification label is
shown below.
To Next Page
Loading...
