KNEGT 504G3 Series - Using the Tractor Implents

504G3 SERIES TRACTOR OPERATION MANUAL
52
4.3 Using the Tractor implents
4.3.1Hydraulicliftsystemcontrollever 
Fig 4-20
1、Draft Control Lever
2、Position Control Lever
3、Rapid Lift Lever
1、 Draft Control
Use draft control lever to control the depth changes in a range, so keep the draft load
constant automatically. This method is often applied when soil condition is almost the same.
See figure 4-21(a)
Move the position control lever all the way forward, then push the draft control lever
forward at desired depth.
A
C
B
Fig.4-17
Fig. 4-19
A——Front jacking point
B——Middle jacking point of Axles
C——Rear jacking point