EasyManua.ls Logo

KNEGT 504G3 Series - Page 33

KNEGT 504G3 Series
111 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
504G3 SERIES TRACTOR OPERATION MANUAL
31
and rear tires to leave ground. Turn front and rear tires about 3 minutes in two
directions, instantly drain out the cleaning liquid. Meanwhile dismantle inlet oil
filter or lifter to clean, refill new oil to transmission system, lifter and front axle as
per specified after reinstall well.
3. Drain out coolant and after clean cooling system by water.
4. Clean diesel filter and air cleaner.
5. Check front toe-in, clutch, and the free path of brake, adjust it if necessary.
6. Check and fasten all outside bolts, nuts and screws.
7. Check the nozzle and valve clearance.
8. Check the working of electrical system.
9. Refill lubricant grease to each part of the tractor.

Table of Contents

Related product manuals