504G3 SERIES TRACTOR OPERATION MANUAL
41
b.When leaving the tractor,get up
form the seat,and open the door of
CAB，hold the handle 1 and handle
2 and put the feet on the step,then
get down from the step.And finally
close the door.
Do not jump from the machine. Do
not use the machine controls as
handholds, use the handrails.
Make sure the machine is
stopped and correctly parked
before entering or leaving the cab
or tractor.
4.2.2AdjustSeatandSteeringWheel
Do not adjust the seat and steering wheel when the machine is in operation.
The operator's seat can be adjusted for your comfort. A correctly adjusted seat will
reduce operator fatigue. Position the seat so that you can comfortably reach the
machine controls. For driving the machine, adjust the seat so that you can depress the
pedals fully with your back against the seat back.
• Use operator’s set
The operator's seat can be adjusted for your comfort. A correctly adjusted seat will
reduce operator fatigue. Position the seat so that you can comfortably reach the
machine controls. For driving the machine, adjust
the seat so that you can depress the pedals fully
with your back against the seat back.
1.Fore/Aft Adjustment
a)Lift handle A upwards and slide the seat forwards
or backwards to the required position.
b)Release handle A and make sure the seat locks
into position.
2 .Height Adjustment
Fig.4-13
handle 2
steering
wheel
handle 1
Fig.4-12
To Next Page
Loading...
