Need help?Do you have a question about the Knox KeySecure 5 and is the answer not in the manual?
Details on power supply, wiring, and network connections for the KeySecure.
Instructions for installing the battery and mounting the KeySecure unit.
Lists necessary hardware and software for initial KeySecure setup.
Steps to configure device settings, location, and network parameters.
Explains the SecurePIN feature for temporary access codes.
Details on the Dual-PIN feature for enhanced key release security.
How to adjust LED and keypad backlight brightness for different modes.
Guide on initial configuration and software updates via USB.
Procedure to perform a factory reset on the KeySecure device.
Steps for synchronizing the device with KnoxConnect via WiFi, Ethernet, or USB.
Instructions for releasing and returning an eKey from the KeySecure 6.
Instructions for releasing and returning a mechanical key from the KeySecure 5.
To Next Page
General