1601 W. DEER VALLEY RD. PHOENIX, AZ 85027 | T. 800-552-5669 | TECHSUPPORT@KNOXBOX.COM | KNOXBOX.COM | PAGE 8
OPE-ESYSLR-0325-F
©Knox Company. All rights reserved.
KEYSECURE
®
5 & 6
ADMIN & USER GUIDE
NOTE: Amber LED lights will flash five times to indicate the unit is powered. Keypad backlight
will illuminate and LED lights will indicate security status of the key(s).
16. Power must be ON and the Disable eKey Retention Right setting must be unchecked in the
KnoxConnect device configuration for the eKey charging port to lock and secure the Knox
eKey in the KeySecure 6.
If the power is ON and the eKey charging port is not active, check with your KnoxConnect software
administrator to verify that the device has been enabled before contacting Knox Technical Support
To Next Page
Loading...
Need help?
General