Knudson EL 2002 - 6. REQUIRED TOOLS AND EQUIPMENT; 6.1. HAND TOOLS

7/11/2005 VERSION 2.0 11
6. REQUIRED TOOLS AND EQUIPMENT
6.1. HAND TOOLS
6.1.1. Combination or Open End Wrenches
- 7/16-in
- 9/16-in
6.1.2. T-Handle Hex Wrench
- 1/8-in up to 5/16-in – 1/16-in increments
6.1.3. L-Handle Hex Wrench
- 1/8-in up to 5/16-in – 1/16-in increments
- Ball-Nose type wrenches recommended
6.1.4. Cutting Equipment
- Hack Saw
- Band Saw