7/11/2005 VERSION 2.0 8
4. MACHINE SPECIFICATIONS
4.1. STANDARD BASE UNIT SPECIFICATIONS
Length = 20.75-in (525-mm) [mount to mount]
Width = 22.75-in (575-mm) [handle to handle]
Height = 26.75-in (680-mm) [base to vertical handle]
Weight = 74.5-lbs (34-kg) [chassis only]
Weight = 90.0-lbs (41-kg) [with four (4) tooling sets]
4.2. STANDARD EQUIPMENT FEATURES
4.2.1. Profiles
Each profile requires the use of a specific tooling set, which includes:
- Top Knife
- Side Knife – Left
- Side Knife – Right
- Mandrel assembly
4.2.2. Forming Details
Manually Operated Crimping Mechanism
- Adjustable crimp depth
- Adjustable side knife position
- Rack and Pinion Crimp Gears
- Spring Return to Neutral Position
Manually Operated Advancing Mechanism
- Rack and Pinion Advance Gear
- Locking/Release Pin for Advance Handle
- Crimp Stop in Final Advance Position
4.2.3. Production Speed
Elbows per minute = approximately two (2).
Time required to change tooling sets = approximately 10-min. (See Section 9)
4.3. ADDITIONAL EQUIPMENT FEATURES
4.3.3. Accessories
Push Tool
Multiple Tooling Sets (Optional)
Side mount/Storage bars for additional tooling (Optional)
To Next Page