Kobalt 46835093 User Manual (English)

Questions and Answers:

Z
zbrownAug 10, 2025
Why does my Kobalt Trimmer motor fail to start?
- A
  Amanda WilliamsAug 10, 2025
  If the Kobalt Trimmer motor doesn't start when you press the switch trigger, there could be a few reasons. First, check that the battery is securely in place, ensuring the latches on the battery compartment snap into place. Another possibility is that the battery isn't charged, so charge it following the instructions that came with your model. If these steps don't work, there might be a wiring or electrical contact issue, so call 1-888-3KOBALT (1-888-356-2258) for technical service.
T
toni33Aug 15, 2025
What to do if Kobalt 46835093 Trimmer head will not advance line?
- K
  Kristy TorresAug 15, 2025
  If the Kobalt Trimmer head won't advance the line, it could be due to several reasons. First, stop the trimmer, remove the battery, and check if the motor shaft or trimmer head is bound with grass, and remove any grass. Also, the spool may not have enough line, so remove the battery and replace the trimmer line. In addition, a dirty trimmer head could be the culprit, so remove the battery and clean the spool. Lastly, the line might be tangled on the spool; in this case, remove the battery, take the line off the spool, and rewind it.
M
mckaygraceAug 20, 2025
How to fix Kobalt Trimmer line not cutting well?
- P
  Paul AllenAug 21, 2025
  If the line on your Kobalt Trimmer isn't cutting well, it could be that the cutting blade on the guard has become dull. You can sharpen the cutting blade with a file or replace it with a new blade.
P
Pamela SmithAug 26, 2025
Why Kobalt Trimmer motor fails to start?
- W
  William CharlesAug 26, 2025
  If the Kobalt Trimmer motor doesn't start when you depress the switch trigger, there are a few potential reasons. First, ensure the battery is securely in place by checking that the latches on the battery compartment snap into place. Second, the battery may not be charged, so charge it according to the instructions included with your model. If these steps don't work, there may be a wiring or electrical contact problem.
T
Tyler BradleyAug 30, 2025
Why is the Kobalt Trimmer line not cutting well?
- J
  James MitchellAug 30, 2025
  If the line on your Kobalt Trimmer isn't cutting well, it's likely that the cutting blade on the guard has become dull. Sharpen the cutting blade with a file or replace it with a new blade.
J
Jaime BarronSep 4, 2025
What to do if Kobalt Trimmer smokes during operation?
- P
  Patrick McfarlandSep 4, 2025
  If your Kobalt Trimmer smokes during operation, it means that the trimmer is damaged. Stop using the string trimmer immediately.