17
WARNING
OPERATING INSTRUCTIONS
3. Starting/Stopping The Saw (Fig 7)
This tool has no provision to lock the trigger
switch in the ON position and should never
be locked ON by any other means.
To start the saw: Release the trigger switch
lock-off button (C) by pressing the button as
shown. Press the trigger switch (D) to turn
the motor on.
To stop the saw: Releasing the trigger switch
turns the motor off.
For your safety, this tool is equipped with
lock-off button which prevents the tool from
unintended starting. NEVER use the tool if it
runs when you simply pull the switch trigger
without pressing the
lock-off button.
7
D
C
WARNING
To Next Page
Loading...
