4
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOLS NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
Wh Watt Hour Energy Storage Capacity
Ah Amp Hour Current Capacity
~ Alternating Current Type or a characteristic of current
Class II Construction Double-insulated construction
RPM Rotating Speed Revolutions per minute
/min Per Minute Revolutions, strokes, surface speed, orbits, etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s
Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Safety Alert Precautions that involve your safety.
Hand and Feet Keep hands and feet away.
Safe Distance Keep bystanders a safe distance from the machine.
Stop the Machine
Stop the motor and disconnect the power supply before
leaving the machine.
Moving Parts
Stay away from moving parts. Keep all guards and shields
in place.
Objects
Thrown objects can ricochet and result in personal injury or
property damage.
Hand and Feet Keep hands and feet away from rotating impeller.
Hand Keep hands away from the discharge area.
The power
Always keep the power cable away from heat sources, oils
or sharp edges. Immediately remove plug from the mains if
the cable is damaged or entangled.
The power
WARNING! Turn the machine OFF and disconnect it from
the power supply before inspecting, cleaning, changing
accessories or conducting any other maintenance task.
To Next Page
Loading...
Need help?
General
