Kobalt A081002 User Manual

11
• Push the loop of the extension cord through the
slot on the cord lock from the opposite side of the
restraint hook. Position the loop over the hook and
pull the cable back through the slot.
• Insert the female end of the extension cord into the
appliance's polarized male plug.
OPERATING INSTRUCTIONS
WARNING
Before operating the snow thrower, carefully examine the electrical cord. If the cord is damaged, do
not use the snow thrower. Replace or repair the damaged cord immediately.
NOTE:
Before using this machine, make sure that the power source you will use complies with the
specications detailed in this manual. Before inserting the plug into the socket, verify that the snow
thrower’s impeller and rubber plates are rmly secured, and that the rubber plates are facing the
correct direction. Perform a test run to ensure that the rotor turns freely.
1. SECURING THE EXTENSION CORD
Extension
cord
Appliance
cord
Extension cord
Slot

Kobalt A081002 Specifications

General

Brand	Kobalt
Model	A081002
Category	Snow Blower
Language	English