33
OPERATING INSTRUCTIONS FOR THE ROUTER TABLE
When using the router installed in the table, use the following instructions.
28. Switch Box Operation
Two receptacles are located at the back of the
integrated safety switch (W). Use one for plugging
in the router. The other may be used to plug in a
vacuum or a light (not included).
WARNING
• To ensure safety and reliability, when one
receptacle is used for the router, the capacity
of the other receptacle is limited to 3 A. The
total current drawn by the two devices must not
exceed 15 A.
a. Insert the safety key into the integrated safety
switch (W).
b. To turn the switch ON, pull the integrated safety
switch up.
c. To turn the switch OFF, push the integrated
safety switch down.
WARNING
• Never leave the router unattended while it is
running or before it comes to a complete stop.
d. To lock the integrated safety switch in the OFF
position, push the integrated safety switch
down to turn the tool OFF, then remove the
safety key from the switch.
28a
28b
28d
Safety key
To Next Page
Loading...
Need help?
General