Why is my Kobalt KHT 1040B-03 Trimmer not working?
If your Kobalt Trimmer isn't working, it might be due to a low battery. Try charging the battery pack. Also, the battery pack or the trimmer may be too hot. Release the ON/OFF trigger switch and allow the battery or tool to cool down before restarting.
What to do if my Kobalt Trimmer has excessive vibration or noise?
Excessive vibration or noise in your Kobalt Trimmer can be caused by several factors. First, the blades may be dry or corroded; try lubricating them. Second, loose blade bolts can cause vibration; tighten them using a 1/8 in. (3mm) hex wrench. If the blades or blade ridge are bent, contact customer service.
Ensure proper plugs, avoid grounded surfaces, protect from wet conditions and damaged cords.
Use correct tool, maintain tools, store properly, keep handles dry.
Keep hands away from blades, use both hands, clear jammed material safely.
Ensure secure footing, stand upright, press trigger switches and lock-off button.
Use both handles, keep hands from blades, clear jammed material safely.
General| Voltage | 40 V |
|---|---|
| Shaft Type | Straight |
| Power Source | Battery |
| Battery Capacity | 2.5 Ah |
| Battery Type | Lithium-ion |
| Charging Time | 60 minutes |
To Next Page