Why is my Kobalt Trimmer not working?
If your Kobalt Trimmer isn't working, it might be due to a low battery. Try charging the battery pack. Also, the battery pack or the trimmer may be too hot. Release the ON/OFF trigger switch and allow the battery or tool to cool down before restarting.
What to do if my Kobalt Trimmer has excessive vibration or noise?
Excessive vibration or noise in your Kobalt Trimmer can be caused by several factors. First, the blades may be dry or corroded; try lubricating them. Second, loose blade bolts can cause vibration; tighten them using a 1/8 in. (3mm) hex wrench. If the blades or blade ridge are bent, contact customer service.
Read manual and labels before use for future reference.
Familiarize yourself with the tool's features and safety requirements before use.
Instructions for installing and removing the battery pack from the tool.
Steps for removing and reinstalling the blade guard for safety.
Learn how to safely turn the hedge trimmer on and off.
Advice on technique, footing, and cutting to achieve optimal trimming outcomes.
Procedures for cleaning the tool and its ventilation slots for proper operation.
Instructions for lubricating the hedge trimmer blade for better performance and longevity.
Guidelines for storing the hedge trimmer safely and properly indoors.
General| Type | String Trimmer |
|---|---|
| Battery Type | Lithium-Ion |
| Adjustable Handle | Yes |
| Line Diameter | 0.08-in |
| Power Source | Battery |
| Battery Included | Yes |
| Charger Included | Yes |
| Voltage | 24V |
| Cutting Width | 13 in. |
| Weight | 6.61-lbs |
To Next Page