Kobalt KMS 1040-03 - User Manual

SM21455
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 888-3KOBALT (888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Sunday. You could also contact us at partsplus@lowes.com.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Español p. 17
KOBALT and logo design are trademarks or
registered trademarks of LF, LLC. All rights reserved.
ITEM #3809898/4132850/4665016 /5129684/5192325
STRING TRIMMER
ATTACHMENT
MODEL #KMS 1040-03

Kobalt KMS 1040-03 Specifications

General

Brand	Kobalt
Model	KMS 1040-03
Category	Trimmer
Language	English

Summary

Product Specifications

Package Contents

Safety Information

General Safety Precautions

Read and understand this entire manual before attempting to assemble or operate this product.

California Proposition 65 Warning

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the state of California.

Know the Tool

To operate this tool, carefully read this manual and all labels affixed to the tool before using it.

Safety Information

Symbol Definitions

Some of the following symbols may be used on this tool. Please study them and their meaning.

Important Safety Instructions

When using electric trimmers, basic safety precautions should always be followed to reduce the risk of fire, electric shock...

Grass Trimmer Safety Warnings

Do not use the machine in bad weather conditions, especially when there is a risk of lightning.

Safety Information

Operating Safety Precautions

While operating the machine, always wear long trousers. Exposed skin increases the likelihood of injury from thrown objects.

Preparation

Know Your String Trimmer

This product requires assembly. Familiarize yourself with all of its operating features and safety requirements.

Assembly Instructions

Mounting the Guard

Install the guard before the attachment is connected to the power head.

Assembly Instructions

Connecting Attachment to Power Head

Align the spring-loaded pin on the attachment with the groove on the coupler and push the attachment shaft.

Operating Instructions

Holding the String Trimmer

Dress properly to reduce the risk of injury when operating this tool. Wear eye and ear/hearing protection.

Using the String Trimmer

Tips for best trimming results. Check for damaged/worn parts before each use.

Operating Instructions

Adjusting Cutting Line Length

The trimmer head allows the operator to release more cutting line without stopping the motor.

Operating Instructions

Adjusting the Cutting Swath

The string trimmer is factory set at 15-inch (38 cm) cutting swath. To decrease the cutting swath...

Care and Maintenance

Cleaning the Trimmer

To prevent serious personal injury, remove the battery pack from the tool before servicing, cleaning, changing attachments.

Line Replacement

Always use triangle-shaped twisted nylon cutting line with a size that does not exceed 0.08 in. (2.0 mm).

Care and Maintenance

Winding the Spool with New Line

Fold the cutting line in half and hook the folded end of the cutting line as shown in Fig. 6b.

Care and Maintenance

Alternative Line Replacement Method

You can replace the new line in another way: Press the two release tabs on the spool base and remove the spool retainer.

Care and Maintenance

Transmission Gears Lubrication

The transmission gears in the gear case need be lubricated periodically with gear grease.

Storage Instructions

Clean the tool thoroughly before storing it. Store the unit in a dry, well-ventilated area.

Troubleshooting

Warranty