Kobalt KMH 1040-03 - Safety Information; Preparation

7
SAFETY INFORMATION
• When servicing, use only identical replacement parts.
• Use of any other accessory or attachment may increase the risk of injury.
• Battery tools do not have to be plugged into an electrical outlet; therefore, they are
always in operating condition. Be aware of possible hazards even when the tool is not
operating. Take care when performing maintenance or service.
• Do not incinerate the appliance even if it is severely damaged. The batteries can
explode in a re.
• Do not wash the appliance with a hose; avoid getting water in motor and electrical
connections.
• If situations occur that are not covered in this manual, use care and good judgment.
Contact the Service Center for assistance.
• Save these instructions. Refer to them frequently and use them to instruct others who
may use this tool. If you lend this tool to someone else, also lend these instructions
to them to prevent misuse of the product and possible injury.
See operator’s manual for your KOBALT KMS 1040-03 for future use.
See operator’s manual for your KOBALT KEG 1040-03 for future use.
SAVE THESE INSTRUCTIONS
PREPARATION
Know Your Power Head
Before attempting to use the power head, familiarize yourself with all of its operating features
and safety requirements.
WARNING:
• Do not allow familiarity with the tool to cause carelessness. Remember that one careless
moment is enough to cause severe injury. Before attempting to use any tool, be sure to
become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modication is misuse and could result in a hazardous condition
leading to possible serious personal injury.