ASSEMBLY INSTRUCTIONS
8
1. Unbolt the unit from the shipping skid. Use a
ratchet with a 9/16 inch socket. Remove the
unit from the skid. Discard shipping hardware
once removed.
2. Install rubber feet with nuts and washers.
Hardware Used
Nut
AA
x2
BB
Washer x2
PREPARATION
Estimated Installation and Assembly Time: 20 minutes
Tools Required for Installation and Assembly (not included): Safety Glasses; Work Gloves; 9/16 inch
Socket and Ratchet; Adjustable Wrench
ADDITIONAL PARTS REQUIRED FOR USE [not included]
Parts - available at local hardware store.
1. Air Hose
2. Pipe Thread Sealant
CC
Rubber Foot x2
1
Shipping
Bolt
Shipping
Bracket
Shipping
Bolt
2
AA
BB
CC
kobalttools.com
To Next Page
Loading...
Need help?
General
