5
Chapter 1
Connecting the Power
CAUTION:
Use only the AC adapter and power cord included with the
printer dock. Other adapters and cords can damage your
camera, printer dock, or computer.
IMPORTANT: Remove your camera from the printer dock when you
are connecting power.
1 Connect the AC power cord to the adapter,
then to the back of the printer dock.
2 Connect the AC power cord into a power
outlet.
NOTE: Your power cord may be different from
the one pictured. Use the plug that
accommodates your type of power
outlet.
3 Route the cable along the channels located
on the underside of the printer dock, so that
the cable does not interfere with the paper
path.
Bottom View
urg_00041.book Page 5 Friday, January 3, 2003 10:37 AM
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
