50
Chapter 7
Light is off There are no pictures in the
camera.
None required.
The camera is not in the
printer dock or is improperly
seated.
Place the camera in the
printer dock (page 13)
or readjust the camera
placement.
The printer dock is not
connected to the computer.
Connect the printer
dock to the computer
(page 23).
The camera is in auto power-
off.
Press any button.
The printer dock is either
printing in standalone mode
or running a slide show.
The Transfer button is
disabled.
The computer is not running. Turn on the computer.
Transfer Light
Light Status Cause Action/Solution
urg_00041.book Page 50 Friday, January 3, 2003 10:37 AM
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
