13
LOADING THE FILM
For excellent all-around results for indoor and outdoor picture-taking,
use KODAK ADVANTIX 200-Speed Film.
1. Turn the Film-Door Latch (13) to the "open" position and insert the film
cassette completely into the film chamber
➌
.
2. Close the Film Door (19) .
3. Slide the Lens-Cover Switch (10) to the "open" position to uncover the
lens
➍
and to start the auto-film prewind. (If the lens-cover is already
opened, press the shutter button to start the auto-film prewind.)
4. After the film prewinds, the Picture Counter (22) on the LCD Panel (5)
shows the number of exposures remaining (a).
NOTE: After you close the safety-interlock film door, you cannot
open the film door until the film is completely rewound into the film
cassette.
To Next Page
Loading...
