21
UNLOADING THE FILM
After you take the last picture on the film cassette, the film automatically
starts to rewind. When the film is fully rewound, the Picture Counter (22)
on the LCD Panel (5) displays a blinking “0” (b), and a blinking “E” (c)
will appear when you remove the film from the camera.
IMPORTANT: Do not remove the film cassette from the camera until
the motor stops and a blinking “0” appears on the LCD panel.
Using the Rewind Button
If you don’t want to take pictures on the entire film cassette, you can
automatically rewind the film by pressing the Rewind Button (3). Once
you’ve used this feature, you cannot reload the same film cassette
into the camera.
To Next Page
Loading...
