Page | 22 Guidelines to Install Your Baby Monitor
ESSENTIAL GUIDELINES FOR THE INSTALLATION OF YOUR BABY MONITOR
Guidelines to Install Your Baby Monitor
• Before using your Camera and the Parent Unit
together, you must irst establish a radio link
between them. The range may be aected by
environmental conditions.
• Any large metal object such as refrigerator,
mirror, iling cabinet, metallic door or reinforced
concrete between the Camera and the Parent
Unit may block the radio signal.
• The strength of the signal may also be reduced by
other solid structures such as walls or electrical
appliances (including radios, TVs, computers,
cordless or mobile phones, luorescent lights or
dimmer switches).
• The use of other 2.4 GHz products (e.g. wireless
networks [Wi-Fi routers], Blue-tooth systems, or
microwave ovens) may cause interference with
this product. Therefore, always keep the Baby
Monitor at least 5 feet/1.5 meters from such
products, or turn them o if they appear to be
causing interference.
• If the signal is weak, try moving the Parent Unit
and/or the Camera to another position in the
room or bring them near the router in case of the
monitor uses router mode connection”
• Insert one of the in-box batteries into the Parent Unit.
The battery should be inserted with the label facing
• Insert one of the in-box batteries in the bottom of
the Camera. The battery should be inserted with the
label facing downwards.
To Next Page
Loading...
