4 www.kodak.com/go/support
2 Taking pictures/videos
Taking a picture
To get clear, focused pictures:
1
Press the Mode button, then press to highlight
Auto , then press OK.
2 Compose the picture.
3 Press the Shutter button halfway to focus and
set exposure. When the framing marks turn green,
press the Shutter button completely down.
Using the framing marks to take pictures
Framing marks indicate the camera focus area. In Auto mode (and in SCN modes
designed for pictures of people), the camera attempts to focus on faces.
1 Press the Shutter button halfway.
If the camera is not focusing on the desired subject,
release the Shutter button and recompose the scene.
2 Press the Shutter button completely down to
take the picture.
NOTE: Framing marks do not appear in all modes. Multiple framing
marks may appear when faces are detected. When you press
the Shutter button halfway down, the framing marks attempt
to follow the main subject.
Framing marks
Mode
button
To Next Page
Loading...
Need help?
General
