32 www.kodak.com/go/support
Doing more with your camera
Using the Setup menu
Use Setup to customize other camera settings.
IMPORTANT:
Your camera offers a built-in Help system. See page 38.
Press Menu, to choose Setup,
then to access settings
Setup Options
Date & Time Set date and time.
Auto Time Setting Date and time are set when camera is connected
to a computer.
LCD Brightness
Choose LCD brightness during
picture/video capture.
High Power—Brighter LCD; uses more battery
power.
Power Save—Dimmer LCD; uses less power.
Share Button Settings
Choose what is displayed when the Share
button is pressed in Review.
Show or hide:
■ Individual social networking sites
■ E-mail addresses (all or none)
■ KODAK Digital Frames (all or none)
Red-eye Reduction
The Red-eye flash fires automatically
before a picture is taken.
Preflash—The flash fires before the picture is
taken to reduce the chance of red-eye.
Digital correction—The camera digitally
corrects red-eye after a picture is taken.
(Processing time after taking a picture may
increase.)
Video Out
Choose the regional setting that lets you
connect the camera to a television or other
external device.
NTSC—Used in North America and Japan; most
common format.
PAL—Used in Europe and China.
Image Storage
Choose a storage location for
pictures/videos.
Auto—The camera uses the card if one is in the
camera. If not, the camera uses internal memory.
Internal Memory—The camera always uses
internal memory, even if a card is installed.
To Next Page
Loading...
Need help?
General
