Doing more with your camera
www.kodak.com/go/support
23
Changing picture-taking settings
You can change settings to get the best results from your camera:
1 Press the Menu button.
2 Press to highlight a setting, then press the OK button.
3 Choose an option, then press the OK button.
4 Press the Menu button to exit.
NOTE: Some settings are unavailable in some modes.
Setting Options
Exposure Bracketing
Determine the best exposure
level for your conditions based
on your evaluation of 3 pictures.
This setting remains until you turn
the Mode dial.
Off
+/- 0.5
+/- 1.0
The camera takes 3 pictures—at +, at 0, and
at - exposure.
Exposure Compensation
Control how much light enters
the camera.
This setting remains until you turn
the Mode dial.
-2.0 to +2.0 (in 0.5 increments)
To Next Page
Loading...
