Taking pictures/videos
www.kodak.com/go/support
13
Using burst
1 In most Still modes, press the Self-timer/Burst button .
NOTE: Burst is unavailable in Anti-Blur, Hi-ISO, and Panorama modes.
2 Press the Shutter button halfway to focus and set exposure.
3 Press the Shutter button completely down and hold it to take pictures.
The camera stops taking pictures when you release the Shutter button, when the
pictures are taken, or when there is no more storage space.
NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see page 11).
Using the framing grid to compose a picture
The framing grid divides the LCD into thirds—vertically and horizontally. This is
helpful if, for example, you want to balance a picture between water, earth, and sky.
To turn on the framing grid in Capture mode, press
the LCD/Info button until the grid
appears.
Option Description Purpose
Burst
Camera takes up to 3 pictures while the Shutter button is
pressed.
Capture an expected
event.
Example:
A person swinging a
golf club.
All the pictures are
saved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
