Connecting camera to
computer
_[_ CAUTION:
Install KodakEasySharesoftware before connecting the
camera or optional dock to the computer. Failure to do so
may causethe software to load incorrectly.
Transferring pictures with the USB cable
1 Turnoff the camera.
2 Plugthe labeled_ endofthe USBcableinto
the labeledUSBport on yourcomputer.See
yourcomputeruser'sguidefor details.
3 Plugthe otherendofthe USBcableintothe
labeledUSBport on the camera.
4 Turnon the camera.
KodakEasySharesoftwareopensonyour
computer.Thesoftwarepromptsyou through
thetransferprocess.
NOTE:Visitwww.kodak.com/go/howtoforanonlinetutorialonconnecting,
YoucanalsouseaKodakmulti-cardreaderorKodakSDmultimediacardreader-writerto
transferyourpictures,
(_ 38
To Next Page
Loading...
