Kodak EasyShare DX6440

38
Chapter 2
Resetting PAS Settings to Defaults
Reset is available in PAS mode only; it returns all settings to the original factory
defaults. Reset does not change settings for any mode except PAS. See page 28
for a list of the settings.
1 In any Still mode, press the Menu button.
2 Move the joystick to highlight Reset , then press the OK button.
3 Move the joystick to highlight an
option, then press the OK button.
Continue—resets all PAS (manual)
settings and returns you to the Menu
screen.
Cancel (default)—returns you to the
Menu screen without changing your
manual settings.
4 Press the Menu button to exit the menu.
See page 106 for a list of the original factory settings.