6 www.kodak.com/go/support
Taking pictures/videos
Using the framing marks
Framing marks indicate the camera focus area. The camera attempts to focus on
foreground subjects, even if the subjects are not centered in the scene.
1 Press the Shutter button halfway.
When the framing marks turn green, focus is
accomplished.
2 If the camera is not focusing on the desired subject
(or if the framing marks disappear), release the
Shutter button and recompose the scene.
3 Press the Shutter button completely down to
take the picture.
NOTE: Framing marks do not appear in all modes. When you use AF Zone and set Center Zone, the framing
marks are fixed at Center Wide. Multiple framing marks may appear when faces are detected (see
page 29).
Taking a video
Framing marks
1
Press the Shutter button
completely down and
release.
To stop recording, press
and release the Shutter
button again.
2
3
On/Off button
To Next Page
Loading...
