Kodak EasyShare M1073 IS - Viewing Content on Television

24 www.kodak.com/go/support
Working with pictures/videos
Viewing on a television using an A/V cable
You can display pictures/videos/slide shows on a television, computer monitor, or any
device equipped with a video input. To connect the camera to a television, use an A/V
(audio/video) cable (may be sold separately), then see page 14 or page 21.
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see page 32). The slide show stops if you
connect/disconnect a cable while the slide show is running. (Image quality on a television screen
may not be as good as on a computer monitor or when printed.)
CAUTION:
Turn off the camera before connecting/disconnecting the A/V cable.
Failure to do so may cause damage to the camera, pictures, or
memory card.
Purchase accessories www.kodak.com/go/m1073accessories
1
Turn off the camera.
2
Connect the A/V cable.
3
Turn on the camera.
4
View pictures/videos/slide shows on a television.