Transferring and printing pictures
www.kodak.com/go/support 49
Connecting the camera to a PictBridge enabled printer
1 Turn off the camera and printer.
2 Connect the appropri ate USB cable from the camera to the printer. See your printer
user guide for details or www.kodak.com/go/v1253accessories to order cables.
Printing from a PictBridge ena bled printer
1 Turn on the printer. Turn on the camera.
The PictBridg e lo go is d isplayed, follow ed by the curren t pictu re and menu. (If no
pictures are found, a message is displayed.) If the me nu interfa ce turns off, press any
button to redisplay it.
2 Press to highlight a printing option, then press the OK button.
Current Picture—Press to choose a picture. Choose the number of copies.
Tagged Pictures—If your printer is capable, print pictures that you tagged for
printing and choose a print size.
Index Pri nt —Print thumbnails of all pictures. (This option requires one or more
sheets of paper.) If the printer is capable, choose a print size.
All Pictures—Print all pictures in internal memory, on a card, or in Favorites.
Choose the number of copies.
Image Storage—Access Internal/Card or Favorites.
NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer
pictures to your computer, see page 46. In Favorites mode, the current favorite picture is displayed.
Disconnecting the camera from a PictBridge enabled printer
1 Turn off the camera and printer.
2 Disconnect the USB cable from the camera and the printer.
To Next Page
Loading...
