Using the advanced features
20 www.kodak.com/go/easysharecenter
Changing P or M mode settings
P and M modes control ISO, focus, exposure compensation, shutter speed, and aperture
(f-number, also known as f-stop). Use the Menu button to control all other settings.
1 Turn the Mode dial to P or M.
2 Use to move between settings and to change the value.
NOTE: Some settings may be unavailable (see P and M color options). The arrows disappear when you
cannot make further value changes.
3 Take a picture.
Aperture—(also known as f-stop) control the size of the lens opening, which
determines the depth of field.
■ Smaller f-stop numbers indicate a larger lens opening; good for portraits and
low-light conditions.
Aperture
Shutter speed
Exposure compensation
White—selectable
Grey—non-selectable
Yellow—changeable value
Red—out of range
ISO speed
P and M Options
Focus mode
urg_00831.book Page 20 Thursday, December 27, 2007 10:51 AM
To Next Page
Loading...
