6 www.kodak.com/go/support
2 Taking pictures/videos
Taking pictures in Smart Capture mode
1 Turn the Mode dial to Smart Capture .
2 Use the LCD to compose the picture
.
3 Press the Shutter button halfway to focus and set exposure.
Green framing marks
indicate successful focus. If the camera is not focusing on the desired subject, or if red
brackets or “AF” appear, release the Shutter button and recompose the scene.
4 Press the Shutter button completely down.
The new picture is briefly displayed. If
you don’t like it, press the Delete button, then follow the prompts. (To delete a picture
later, see page 23.)
To Next Page
Loading...
