18 www.kodak.com/go/support
Taking pictures/videos
Changing P or M mode settings
1 Turn the Mode dial to P or M.
NOTE: P and M give access to different settings. (See page 17.)
2 Press the Info button .
3 Press to choose a setting, then press OK to edit the setting.
Press to change a setting, then press OK to save it.
ISO—adjust the camera’s sensitivity to light. Higher ISO indicates greater sensitivity.
NOTE: A higher ISO may produce unwanted “noise” in a picture.
Flash Compensation—adjust flash brightness.
Exposure Compensation—adjust the exposure. If the scene is too light, decrease
the setting; if it’s too dark, increase the setting.
Shutter speed—control how long the shutter stays open. (Use a tripod for slow
shutter speeds.)
Aperture—(also known as f-stop) control the size of the lens opening, which
determines the depth of field.
■ Smaller aperture numbers indicate a larger lens opening; good for low-light.
■ Larger aperture numbers indicate a smaller lens opening; keeps the main subject
sharp; good for landscapes and well-lit conditions.
Flash Compensation
Exposure Compensation
Shutter speed
Aperture
ISO
To Next Page
Loading...
