Taking pictures and videos
www.kodak.com/go/support
7
Using the auto-focus framing marks (pictures)
When using the LCD or EVF as a viewfinder, framing marks indicate the camera focus
area. The camera attempts to focus on foreground subjects, even if the subjects are
not centered in the scene.
1 Press the Shutter button halfway.
When the framing marks turn green, focus is accomplished.
2 If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button and recompose the scene.
3 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in all modes. When you use Focus Zone and set Center Zone, the
framing marks are fixed at Center Wide. (See page 29.)
While the shutter button is pressed halfway:
Framing marks
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus
To Next Page
Loading...
Need help?
General
Weight and Dimensions
