Doing more with your camera
www.kodak.com/go/z710support 17
Changing P, A, S, or M mode settings
PASM modes control the aperture (f-number, also known as f-stop), shutter speed, and
exposure compensation. Use the Menu button to control all other settings.
1 Turn the Mode dial to PASM.
The mode options are displayed.
2 Press to choose P, A, S, or M.
3 Press to move between settings, open a setting, or change a setting.
4 Take a picture.
Exposure Compensation—adjust the exposure; good for controlling backlit or
non-standard scenes. If the picture is too light, decrease the setting; if it’s too dark,
increase the setting.
Shutter speed—control how long the shutter stays open. A shaking hand icon
warns of slow shutter speeds. (Use a tripod for slow shutter speeds.)
Aperture
Shutter speed
Exposure compensation
White—selectable
Grey—non-selectable
Yellow—changeable value
Red—out of range
ISO
PASM Options
To Next Page
Loading...
