Kodak EASYSHARE ZD710 User Manual

Taking pictures/videos
www.kodak.com/go/support
11
Using the Drive button
Using the self-timer
To cancel the Self-timer before the picture is taken, press the Drive button. (The
Self-timer setting remains active.)
Use the same procedure to take a video, but:
■ Turn the Mode dial to Video .
■ Press the Shutter button completely down.
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
Mode Icon(s) Purpose
Self-timer See Using the self-timer
Burst See page 12
Normal (none) Normal picture taking
10
2X
2
1
2
3
4
Place camera on a tripod or flat surface.
Compose the scene.
Press the Shutter button halfway, then completely down.
The picture is taken after the delay.
• Once for a 10-sec. delay (so you have time to get into the scene)
• Again for a 2-sec. delay (for a steady, shutter release on a tripod)
• Again for 2 pictures (after a 10- and 18-second delay)
In any Still mode, press the Drive button.

Kodak EASYSHARE ZD710 Specifications

General

Megapixel	7.1 MP
Sensor type	CCD
Image stabilizer	Yes
Image sensor size	1/2.5 \
Digital zoom	5 x
Optical zoom	10 x
Digital SLR	No
Minimum RAM	128 MB
Camera shutter speed	1/2–1/2000; 8-1/1000 s
Minimum storage drive space	200 MB
Minimum system requirements	USB
Compatible operating systems	WINDOWS XP OS + /INTERNET EXPLORER 6.0 +/MACINTOSH OS X 10.3 +/SAFARI 1.1 +
Focus	TTL
Focus adjustment	Auto
ISO sensitivity	80, 100, 200, 400, 800, 1600, auto
Internal memory	32 MB
Compatible memory cards	mmc, sd
Motion JPEG frame rate	30 fps
Video formats supported	QuickTime
Display diagonal	2 \
I/O ports	A/V NTSC/PAL
USB version	2.0
Product color	Black
Bundled software	KODAK EASYSHARE
Flash modes	auto, fill-in, Flash off, Red-eye reduction
White balance	auto, daylight, Fluorescent, Tungsten

Weight and Dimensions

Depth	72.6 mm
Width	97.8 mm
Height	77.5 mm
Weight	280 g