Kodak EASYSHARE ZD710 User Manual

12 www.kodak.com/go/support
Taking pictures/videos
Using burst
Press the Drive button to choose a burst mode.
1 In most Still modes, press the Drive button
repeatedly to choose an option.
2 Press the Shutter button halfway to focus and set
exposure.
3 Press the Shutter button completely down and
hold it to take pictures.
The camera stops taking pictures when you release the
Shutter button, when the pictures are taken, or when
there is no more storage space.
NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see page 16). Burst is not available when shutter speeds are longer than 0.5 seconds.
Mode Icon Description Purpose
First
Burst
Camera takes up to 2 pictures while the Shutter
button is pressed.
Capture an expected
event.
Example:
A person swinging a
golf club.
Last
Burst
Camera takes up to 30 pictures while the Shutter
button is pressed. When the Shutter button is
released, only the last 2 pictures are saved.
Capture an event when
the precise timing is
uncertain.
Example:
A child blowing out
birthday candles.
.Drive

Kodak EASYSHARE ZD710 Specifications

General

Megapixel	7.1 MP
Sensor type	CCD
Image stabilizer	Yes
Image sensor size	1/2.5 \
Digital zoom	5 x
Optical zoom	10 x
Digital SLR	No
Minimum RAM	128 MB
Camera shutter speed	1/2–1/2000; 8-1/1000 s
Minimum storage drive space	200 MB
Minimum system requirements	USB
Compatible operating systems	WINDOWS XP OS + /INTERNET EXPLORER 6.0 +/MACINTOSH OS X 10.3 +/SAFARI 1.1 +
Focus	TTL
Focus adjustment	Auto
ISO sensitivity	80, 100, 200, 400, 800, 1600, auto
Internal memory	32 MB
Compatible memory cards	mmc, sd
Motion JPEG frame rate	30 fps
Video formats supported	QuickTime
Display diagonal	2 \
I/O ports	A/V NTSC/PAL
USB version	2.0
Product color	Black
Bundled software	KODAK EASYSHARE
Flash modes	auto, fill-in, Flash off, Red-eye reduction
White balance	auto, daylight, Fluorescent, Tungsten

Weight and Dimensions

Depth	72.6 mm
Width	97.8 mm
Height	77.5 mm
Weight	280 g